Eldes EWD2, Руководство пользователя

Страница: 6 / 10

66 EN EWD2 Manual v.1.4
18
13. Upon the successful binding process, EWD2 device icon becomes visible in Wireless Device Management section as well as Battery
Level and Signal Level . If the attempt to bind is unsuccessful, try to move EWD2 closer to the ELDES alarm system and bind anew.
14. EWD2 is ready for use.
ATTENTION: Ensure that EWD2 device is properly fixed to the wall and the Mounting Point B portrayed in Fig. No. 5 is properly screwed in.
Otherwise, the tamper switch will NOT supervise the back side of EWD2 enclosure (see also 4. EWD2 ZONES AND TAMPERS ).
NOTE: If you are unable to bind the wireless device, please, restore the parameters of the wireless device to default and try again. See 6.
RESTORING DEFAULT PARAMETERS for more details.