USER MANUAL ELDES ESIM021 V1.1
3
Limited Liability
The buyer must agree that the system will reduce the risk of fire, theft, burglary or other dangers but does not guarantee against
such events.
“ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system.
“ELDES UAB” liability according to local laws does not exceed value of the purchased system. “ELDES UAB” is not affiliated with any of
the cellular providers therefore is not responsible for the quality of cellular service.
Manufacturer Warranty
The system carries a 24-month warranty by the manufacturer “ELDES UAB”. Warranty period starts from the day the system has been
purchased by the end user. The warranty is valid only if the system has been used as intended, following all guidelines listed in the
manual and within specified operating conditions. Receipt must be kept as a proof of purchase date.
The warranty is voided if the system has been exposed to mechanical impact, chemicals, high humidity, fluids, corrosive and hazar
-
dous environment or other force majeure factors.
Package content:
1. ELDES ESIM021 ............................................qty. 1
2. ESIM021 User Manual...... .........................qty. 1
About User Manual
This document describes GSM security and control system ESIM021, it‘s installation and operation. It is very important to read User Manual
before start using the system.
1. General Information
1.1 Function
ESIM021 is a microcontroller based device used to inform users about the alarm in automatic or security systems and control one electric
appliance – open collector.
1.2 Operation description
The GSM security and control system ESIM021 uses the GSM network for transmission of inputs (alarms generated by one of the system
zones) to authorised users. In addition to being informed about triggers/resets of the inputs, the users can manage the system and use the
system to control one electronic device.
The system has two digital inputs (normally open) called Zone1 and Zone2. ESIM021 can also control 1 electronic device (using an open
collector) on receipt of the correct SMS text message from one of the authorised users. For example, users can turn on or off the heating,
lighting, lift the gates, blinds etc. The system remembers the output setting if there is a temporary electricity failure. Once initialised, ESIM021
will function 24/7.
When an authorised number calls to the system, the device answers and the user can listen for 2 minutes to what is going on in the premises.
This function works only when a microphone is connected. This microphone does not include into standard package content. The system
will ignore SMS requests and voice calls coming from unknown telephone numbers. Users can be informed about triggered/reset inputs by
SMS (see chapter 1.2.4) or CALL methods (see chapter 1.2.5). Users also can enable and disable either input (see chapter 2.2).
Any number format can be used, for e37011111111, 861111111 or even short numbers like 111. International numbers must
be entered with „+“ or „00“.
1.2.1 Entering users on the SIM card using a mobile phone
The SIM card should be inserted into the phone. The two user numbers must be entered into the SIM card memory under the names “User1”
and “User2”. These should be entered into the SIM phone book in your mobile phone. It is also possible to enter User1 only. Then the SIM card
should be inserted into the ESIM021.
1.2.2 Entering user by phone call to the system
The SIM card should be inserted into the ESIM021. When ESIM021 starts it looks for User1 and User2 names in the SIM card memory. If the
system can‘t find any of these users, it waits for a phone call, answers the call and saves the phone number as User1.
NOTE:
with this type of setup, only User1 can be entered.
Содержание ESIM021
Страница 1: ...GSM SECURITY AND CONTROL SYSTEM ESIM021...
