elddis encore, Руководство пользователя

Страница: 32 / 100

9-7
HOW TO USE YOUR MOTORHOME’S EQUIPMENT
Use of the burners
For the exact location of the control knobs,
see:
Turning on:
• Push and turn the control knob.
• Turn the control knob anti-clockwise to
the full rate position.
- For automatic ignition models: The
automatic ignition sparks and lights.
- For non-ignition models: Hold a lit
match or gas match to the burners.
• Keep the control knob pressed for about
10-15 seconds and then release it.
• Adjust the height of the flame.
If the burner accidentally extinguishes
turn the control knob to the 0 position and
wait at least 1 minute before re-igniting
the burner.
If the burner has not lit within 15 seconds
turn the control knob back to the 0
position and release it. Wait at least 1
minute and repeat the steps above to
turn on the appliance.
Turning off:
• Turn the control knob clockwise to the 0
position to turn off the burner.
Always make sure the control knob is
in the 0 position when you have
finished using the gas burners.
Do not shut the glass lid when the
burners are lit or still warm.
Use of the electric hotplate (if
applicable)
For the exact location of the control knob,
see:
Turning on:
• Rotate the control knob either clockwise
or anti-clockwise to the required position
(1-6).
For maximum efficiency, a correctly sized
pan with a flat heavy gauge base should
be used. The pan size should be the
same or slightly larger than the hotplate
(up to 1”/2.5cm oversize).
Turning off:
• Turn the control knob to the 0 position to
turn off the hotplate.
Always make sure the control knob is
in the off position when you have
finished using the hotplate.
Do not shut the glass lid when the
hotplate is turned on or still warm.