elddis Crusader, Руководство пользователя

Страница: 36 / 122

9-3
HOW TO USE YOUR CARAVAN’S EQUIPMENT
COOKING EQUIPMENT
WARNINGS
(i) All pans should be mounted centrally
over the burners, even when cooling, to
protect adjacent walls.
(ii) Do not lower the glass cover until hob
has cooled down.
(iii) Glass lids may shatter when heated.
Turn off all burners and grill before
shutting the lid. The glass cover should
be raised when operating the grill.
(iv) Accessible parts may be hot when the
grill and oven are in use. Young children
should be kept away.
(v) Do not use grill or oven as a space
heater.
(vi) When you are cooking it is essential to
provide additional ventilation, such as
opening windows near grill, cooker and
oven.
Gas Hob
USING THE APPLIANCE
CAUTIONS
•
Glass lids may shatter when heated.
Turn off all hotplates and allow to cool
before closing the glass lid.
• Remove all spillage from the surface of
the glass lid before opening.
• The glass lid has a tendency to snap
4 burner hob
shut towards the end of lowering. This
is caused by the travel lock action of
the hinges as it is activated. Make sure
all fingers are removed from appliance
when closing the lid.
• The appliance is not intended for use
by young children or infirm persons
without supervision.
• Young children should be supervised to
ensure that they do not play with the
appliance.
Electric Hotplate
Ensure the electricity is switched on.
The hotplate control is numbered from 1 to 6. To
turn it on, rotate the knob either clockwise or
anti-clockwise to the required position. Position 1
is the coolest setting.
To turn the hotplate off, rotate the knob until the
line or pointer on the knob lines up with the zero
on the control panel.
The hotplate is a sealed
construction and transfers heat
through conduction. For
maximum efficiency a correctly
sized pan with a flat heavy gauge
base should be used. Pan size
should be the same or slightly
larger (up to 1”/2.5cm oversize).
Before using your hotplate for
the first time, we recommend
that you prime and then season
it.
To prime it, switch on the
hotplate for a short period,
without a pan, to harden and
burn off the coating. Use a
medium to high setting for 3-5
minutes. A non toxic smoke may
occur during this process. Allow
Control panel