manualshive.com logo in svg

elddis AUTOQUEST 115 2012, Руководство пользователя, Страница: 32 / 94

Поделиться
Скачать
elddis AUTOQUEST 115 2012 Скачать руководство пользователя страница 32

9-7

HOW TO USE YOUR MOTORHOME’S EQUIPMENT

Additional features

•

The brightness of the display reduces after a
few seconds if no other buttons are pressed.

•

If the door is open, the interior light is
switched off automatically after 2 minutes.

•

Failures are indicated by flashing of the failure
indicator LED(4).

•

If the door is kept open for too long (more
than 2 minutes), an acoustic signal is initiated
(pulsing whistle tone).

•

If the electronic control detects any failure,
an acoustic signal (pulsing whistle tone) will
sound. At the same time the display starts
flashing (for trouble-shooting, please see later
section).

Door locking

Open the door by pressing the locking button
and pull open.

Shut the door again by pushing it to close. The
snapping into the lock can be heard.

Note: If the vehicle is stationary for a long period,
the locking hook may be clamped by means of a
lockbar. The door may now be opened by just
pulling it without need of pressing the locking
button. See below.

Caution:

  As a basic rule, shut and lock the door

before starting your journey.

Positioning the shelves

The shelves may be pulled out by smoothly lifting
them, and may be positioned as desired.

Removable freezer compartment

The freezer compartment may be removed to
enlarge the cooling compartment.

Unlock the freezer compartment on both sides
(1)

Pull the freezer compartment out (2) and store
safely.

Содержание AUTOQUEST 115 2012































































































Отзывы:

Нет отзывов