Battery check
The battery check function of the ST01 checks
the battery voltage during the transmission pro-
cedure. In case of a low battery, the battery LED
blinks once per minute.
Troubleshooting
The receiver does not react to the temperature
sensor:
-
Replace the batteries, if necessary.
-
Check that the radio link between the sensor
and the receiver at the installation site is not
impaired.
-
Reprogram the sensor into the radio recei-
vers, if necessary.
-
Other wireless devices using the same fre-
quency and working in direct proximity may
interfere with the device.
Displaying/setting the operat. mode
T F
PWM
I
/O
OFF
1.
Press the
button to switch between
the operating modes
.
→ the LED in the right column (F) displays
the operating mode of the sensor
→ the LED in the left column (T) display the
current temperature and the temperature
setpoint
2. Do not press a button for 10 s to save the
settings.
→ the LED goes off
UM1
18852 0815 GB
Setting the setpoint temperature
T F
PWM
I
/O
OFF
ODER
1. Press the
/
button to set the set
-
point.
→ the setpoint LED blinks and the LED for
the current value lights up
Are actual value and target value is
identical, the corresponding LED will
flicker.
2. Do not press a button for 10 s to save the
setting.
Setting the control mode
T F
PWM
I
/O
OFF
(1.)
(2.)
1. Press the
mode button. The current
mode is displayed for 10 s.
2. Within the 10 s, press the
button to
switch between PDM and I/O.
3. Do not press a button for 10 s.
→ the LED goes off and the sensor returns
from setup mode to control mode
→ the settings have been saved
The saved control mode remains
after a battery change.
Display overview
Temperature setting
Function setting
Operating
modes
Control
modes
max. value approx. 25 °C
min. value appro. 14 °C
Current value
Setpoint
Sending
Low battery
Day operation
Night setback
Anti-freeze
OFF
ON/OFF
Pulse
duration
modulation
Start-Up
Disposal
Waste electronic equipment must not be dispo-
sed of with household waste!
Dispose of the waste product via collec-
tion facilities for electronic scrap or via
your specialist dealer.
Dispose of used batteries in a recycling
bin for batteries or via the specialist trade.
Dispose of packaging material in the
recycling bins for cardboard, paper and
plastic.
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro-
duction faults. Any unauthorized tampering with,
or modifications to, the product shall render this
warranty null and void.
Conformity
This product complies with the essential require-
ments of the R&TTE directive 1999/5/EC.
For use in: EU/CH/FL/IS/N
The Declaration of Conformity can be found on
the Internet at: www.eldat.de
Customer service
If the device does not work properly despite
proper handling or in case of damage, please
contact the manufacturer or your retailer.
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone: + 49 (0) 33 75 / 90 37-310
Fax: + 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-mail: [email protected]
General information