UM164362A
0319 GB
GENERAL INFORMATION
Disposal
Waste electrical products not be disposed of
with household waste!
Dispose of the waste product via a col-
lection point for electronic scrap or via
your specialist dealer.
Put the packaging material into the
recycling bins for cardboard, paper and
plastics.
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro
-
duction faults.
Any unauthorized tampering with, or modifications
to, the product shall render this warranty null and
void.
Conformity
Hereby, ELDAT GmbH declares that the radio
equipment type RCL07 is in compliance with Di
-
rective 2014/53/EU. The full text of the EU dec
-
laration of conformity is available at the following
internet address: www.eldat.de
Customer Service
If the device does not work properly despite prop
-
er handling or in case of damage, please contact
the manufacturer or your retailer.
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone: + 49 (0) 33 75 / 90 37-310
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-Mail: [email protected]
DELETE TRANSMITTERS
Operation
[Press button]
Display
Description
Deleting individual call- /priority transmitter
R
1
2
3
4
J2
J1
Q/S
R
Tx
<1,6 s
R
>1,6 s
R
>1.6 s
LED
R
flashes rapidly
The receiver is in delete mode for 30 seconds.
Delete the required transmission code during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button
R
.
Tx
A/B/
C/D
<1.6 s
LED
R
illuminates
for approx. 2 s
Press the transmitter button to delete.
The transmission code is deleted and the
receiver changes to operation mode.
If an attempt is made to delete an acknowledgment or switching transmitter,
there is at reaction on the RCL07.
Deleting call- /priority transmitter complitly
R
1
2
3
4
J2
J1
Q/S
R
R
>1.6 s
LED
R
flashes rapidly
The receiver is in delete mode for approx.
30 seconds. Again press the button
R
during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button
R
.
R
>1.6 s
LED
R
illuminates
for approx. 2 s
All transmission codes of the call- or priority
transmitters have been deleted and the
receiver changes to ready for operation.
Deleting individual acknowledgement- /switch transmitter
Q/S
>1,6 s
Tx
<1,6 s
Q/S
1
2
3
4
J2
J1
Q/S
R
A
B
C
D
Q/S >1.6 s
LED
Q/S
flashes rapidly
The receiver is in delete mode for 30 seconds.
Delete the required transmission code during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button
Q/S
.
Tx
A/B/
C/D
<1.6 s
LED
R
illuminates for
approx. 2 s
Press the transmitter button to delete.
The transmission code is deleted and
the receiver changes to operation mode.
If an attempt is made to delete an acknowledgment or switching transmitter,
there is at reaction on the RCL07.
Deleting acknowledgment- /switch transmitter complitly
Q/S
>1,6 s
Q/S
>1,6 s
Q/S
1
2
3
4
J2
J1
Q/S
R
Q/S >1.6 s
LED Q/S flashes rapidly
The receiver is in delete mode for approx.
30 seconds. Again press the button
Q/S
during this period. After the period has expired,
the receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button
Q/S
.
Q/S >1.6 s
LED Q/S illuminates for
approx. 2 s
All transmission codes of the acknowled-
gement- /switch transmitters have been
deleted and the receiver changes to ready
for operation.
<1.6 s
<1.6 s
>1.6 s
>1.6 s
>1.6 s
>1.6 s
>1.6 s
>1.6 s
PROGRAMMING
