3
BASIC SETTINGS
M1 Setting the time and date
1. Press the key, then the
/
keys until the
TIME/DATE
screen appears
,
press
OK
to
confirm.
2. Set the hour (00–23) using the
/
keys,
press
OK
to confirm; the cursor will then move
to the minute.
3. Set the minute using the
/
keys, press
OK
to confirm; the cursor will then move to the
day.
4. Set the date using the
/
keys, press
OK
to confirm; the cursor will then move to the
month.
5. Set the month using the
/
keys, press OK
to confirm. Press OK to confirm
M2 Pause
key, use the
/
key to select the
PAUSE
time (1–9 seconds) (the default setting is 3).
Press
OK
to confirm.
M3 Dialling code
key, select
DIALCODE
, press
OK
to confirm.
Enter the number using the keys and press
OK
to confirm.
M4 Signalling process setup
Press the key, then
/
keys until
MFS/PD
appears on the screen. Press
OK
to confirm, se
-
lect
MFS
(multi-frequency signalling)/
PD
(pulse
dialling) using the
/
keys, press
OK
to confirm.
M5 Call LED setup
Press the key, then
/
buttons until
Call
LED
appears on the screen. Press
OK
to con-
firm, select
ON/OFF
using the
/
keys, press
OK
to confirm.
M6 Flash time setup
Press the key, then the
/
keys until
FLASH
TIME
appears on the screen. Press
OK
to con-
firm, select the flash time (100/300/600 ms) using
the
/
keys, press
OK
to confirm. The default
setting for most countries is 100, and 300 for
France/Portugal.
M7 Key tones setup
Press the key, then the
/
keys until
KEY
TONES
appears on the screen. Press
OK
to con-
firm, select
ON/OFF
using the
/
keys, press
OK
to confirm.
M8 LCD contrast setup
Press the key, then the
/
keys until
CON-
TRAST
appears on the screen. Press
OK
to con-
firm. Use the
/
keys to select the preferred
setting, press
OK
to confirm.
M9 Visual call signal setup
A flashing light signal can be activated to accom
-
pany the ringtone for alerting you of an incoming
call (
CALL FLASH)
.
Press the key, then the
/
keys until
CALL
FLASH
appears on the screen, press
OK
to con-
firm. Select
ON/OFF
and press
OK
to confirm.
M10 Recording an emergency message
1. Press the key, then the
/
keys until
EMERGENCY MESSAGE
appears on the
screen.
2. Press the
OK
key to play back the recording.
3. Press and hold the
OK
key to record a new
message (max. 30 seconds).
Recording begins after the beep; let go of the
OK
key to stop recording. The recording will
then be played back automatically.
M11 Silent distress call
When the
Silent distress call
function is active,
neither a message nor a ringtone is audible (see
“help message”).
Press the key, then the
/
keys until
SIL.
DIST.
appears on the screen. Press
OK
to con-
firm, select
ON/OFF
using the
/
keys, press
OK
to confirm.
M12 Activating the distress call function
When the distress call function is activated, a
stored telephone number is called and a record-
ed message requesting help will be played back
when you press one of the direct dial keys or the
key on the call transmitter.
Press the key, then the
/
keys until
EMERG.
FUNCT.
appears on the screen. Press
OK
to con-
firm, select
ON/OFF
using the
/
keys, press
OK
to confirm.
M13 Booster function setup
Press the key, then the
/
keys until
CON-
TINUOUS BOOST
appears on the screen, press
OK
to confirm. Select
ON/OFF
using the
/
keys. The default setting is off (
OFF
).
M14 Adjusting the ringer volume
Press the key, then the
/
keys until
RING-
ER VOL.
appears on the screen. Press
OK
to
confirm. Adjust the volume using the
/
keys
(5 settings), press
OK
to confirm.
The volume for the speakerphone function
(speaker) can be adjusted by using the
/
keys during a call.
M15 Adjusting the ringtone volume
Press the key, then the
/
keys until
RING-
ER MELODY
appears on the screen. Press
OK
to confirm. The phone has three melodies to
choose from. Use the
/
, keys to select your
preferred melody, press
OK
to confirm.
The melodies are played back during selection;
Melody 2 is the default setting.
M16 Voice announcer setup
Press the key, then the
/
keys until
VOICE
ANN.
appears on the screen. Press
OK
to con-
firm. Select
ON/OFF
using the
/
keys, press
OK
to confirm. If you select
ON
, number keys
and help messages will be announced when you
press them.
M17 Teaching in/deleting call transmitter
The phone is supplied with an
RT26 wristband
transmitter
as
a call transmitter
. This is already
taught in to the phone. Additional wristband trans-
mitters or other Easywave call transmitters (e.g.
RT27 necklace transmitter) must be additionally
taught into the phone.
Teaching in a call transmitter
1. Press the key, then the
/
keys until
EMERGENCY TRANSMITTER
appears on
the screen.
2. Press
OK
to confirm.
3. Select
REGISTR.
using the
/
keys, press
OK
to confirm.
The word
REGISTR...
will appear on the screen
for 3 seconds. Now, press and hold the call trans-
mitter key for 1 second until
OK
appears on the
screen. You can use this process to teach in up to
5 call transmitters. If the connection has not been
established, the word
ERROR
will appear on the
screen and you will need to repeat the process.
Deleting a call transmitter
If you select
DELETE?
,
all
taught in call transmit-
ters will be deleted.
1. Press the key, then the
/
keys until
EMERGENCY TRANSMITTER
appears on
the screen.
2. Press
OK
to confirm.
3. Select
DELETE
using the
/
keys, press
OK
to confirm.
Press and hold the
key to exit this menu
.
M18 Recording, changing or deleting
a name announcement
If
caller information is
active, the phone will dis-
play and announce the caller’s number when
you receive a call. If this number is stored in your
contacts list, the name will also be displayed. If a
name announcement has also been recorded for
the number, the name will be announced rather
than the number.
1. Press the key, then the
/
keys until
REC. NAME
appears on the screen.
2. Press
OK
to confirm.
3. Use the
/
keys to select the number for
which you would like to record a name.
4. Press and hold the
OK
key. After the beep, say
the text or name loudly and clearly into the mi-
crophone. Then release the
OK
key. Record-
ing will stop automatically after 4 seconds and
the new recording will be played back,
5. To create additional recordings. repeat steps 3
+ 4 or press the
keys to exit recording mode.
M19 Storing a number
See also Section 7.1 “
Storing a number in the
contacts list
”, page 3.
M20 Selecting the language
Press the key, then the
/
keys until
LAN-
GUAGE/ SPRACHE
appears on the screen.
Press
OK
to confirm, then use the
/
keys
to select your preferred language, press
OK
to
confirm.
Menu structure/display
Display
Selection with the
or
key
see point
TIME/DATE
M1
PAUSE
M2
DIALCODE
M3
MFS/PD
MFS
M4
PD
CALL LED
ON
M5
OFF
FLASH TIME
M6
KEY TONES
OFF
M7
ON
CONTRAST
M8
CALL FLASH
ON
M9
OFF
EMERGENCY
MESSAGE
M10
SIL. DIST.
OFF
M11
ON
EMERG. FUNCT.
ON
M12
OFF
CONTINUOUS BOOST
OFF
M13
ON
RINGER VOL.
M14
RINGER MELODY
M15
VOICE ANN.
ON
M16
OFF
EMERGENCY
TRANSMITTER
REGISTR.
M17
DELETE?
REC. NAME
M18
SAVE NO.
M19
LANGUAGE/SPRACHE
DEUTSCH
M20
ENGLISH
ESPANOL
NEDERLANDS
FRANCAIS
ITALIANO
2
