Elcomponent EnergyPro, Руководство пользователя, Страница: 10 / 22

EnergyPro Datalogger
Logger Operation
Turning On and Off
The logger is turned on by pressing any key on the keypad for 1 second. Once the
logger is on, a title screen will appear on the display, following by the main screen.
The logger is turned off by pressing the sleep key (F1) from the main screen.
The
EnergyPro draws a small amount of power from the V1 measurement channel for
power and to charge the internal battery. The EnergyPro will shut itself off after 2
minutes of idle time if it is not recording data and the voltage on V1 is less than 200V.
While recording the
EnergyPro will minimize power consumption by:
i. Turning off the LCD backlight after 2 minutes of no activity on the keypad.
ii. Turning off the LCD totally if battery capacity is low and after 2 minutes of no
activity on the keypad.
Memory Card
If there is no memory card the EnergyPro will not record data and the ‘running’ icon
will not appear on the main screen. When a memory card is inserted the ‘running’
icon will appear and the
EnergyPro is ready to record data. When recording is started
the EnergyPro reformats the memory card and any data from a previous survey will
be erased.
8
The memory card should NEVER be removed while data is being
recorded. ALWAYS stop recording before removing the memory
card, otherwise data on the card may be corrupted.