06/2016 - Art. Nr. 4200 1041 1103A
26
Commissioning
Confirmation of "Manual Handshake" data
The following sequence for confirming or cancelling the data entry is the same for a number of different changes to the
parameters. For this reason, this sequence is not illustrated in detail for each of the parameter settings outlined below. The
parameter modifications which require a "Manual Handshake" are highlighted on the following pages.
These parameter modifications are assigned the following reference:
Manual Handshake
You are now asked to confirm the modifications that have been made.
Accept or cancel the entry.
The "Manual Handshake" is explained below using menu 5 as an example.
The following parameters have been modified in the example:
- Sealing test activated after burner cycle
- Post-ventilation time activated (5 seconds)
The following screen appears once the parameter has been set and the data entry confirmed.
You are asked to confirm the data within 7 seconds. In this case: "Sealing test after burner cycle
activated".
A counter displaying the remaining time appears in the bottom right-hand corner of the screen.
Only confirm the displayed settings if they correspond with your specifications. The
entry can be accepted if both values are identical. The entry can be cancelled if there
is a deviation in values.
To confirm and save the parameter modification, select symbol
and confirm with key
.
To cancel the modifications, select symbol
and confirm with key
. Alternatively,
you can wait until the time has expired.
No modifications are made.
Note:
You will return to the previous menu if the procedure is cancelled. The previous unmodified
settings are displayed.
If you accept these values, a second screen appears.
In this case: "Post-ventilation time activated, duration 5 seconds".
Once again, the data must be confirmed within 7 seconds.
Only confirm the displayed settings if they correspond with your specifications. The
entry can be accepted if both values are identical. The entry can be cancelled if there
is a deviation in values.
Confirm the data or stop the procedure as described above.
If all values of the "Manual Handshake" have been confirmed, the data is saved in the BT 3xx
control unit. The modifications have been made and the procedure is completed. You return to
the starting screen.
Note:
If several parameters of a menu have been changed simultaneously (as in the example), the
individual modifications must be confirmed separately.