EL.CO. S.R.L. – ELK22MP
-
INSTRUCTIONS FOR USE
- Ver.05 - 03/22 - PAG. 6
It is possible to continue the serial line using the same
connector (see Paragraph 10.6). In this mode, the termination
resistor will not be placed at the end of the battery of the
ELK22MP devices but it must be the device to which the line is
connected that must have the termination resistor. To do this,
disconnect the resistance from the accessory and continue the
line with the cables for RS485 as below screenshot shwon
4.7 – IMAGE CONNECTION
4.7.1 – ELK22MP Stand Alone
4.7.2 – ELK22MPM Stand Alone
4.7.3 – ELK22MPE Stand Alone
4.7.4 – ELK22MP with at most 15 ELK22MPS
4.7.5 – ELK22MPM with at most 15 ELK22MPS
4.7.6 – ELK22MPE with at most 31 ELK22MPS
7 - pole RX (-)
8 - pole TX (+)
