iBurst Modem Card Type(UTC) Manual
Setup
[Setup] tab can be displayed in the main dialog window by clicking the [Setup] tab. [Setup] tab is
used to configure the display items in the [Link Info] tab.
(6)
(5)
(4)
(3)
(2)
(1)
The following describes usage of each item of the above figure.
(1)
Check the [ON] radio buttons at the right hand side of the items you want to display in the
[Link Info] tab.
(2)
Check the [OFF] radio buttons at the right hand side of the items you don’t want to display in
the [Link Info] tab.
(3)
The configuration shown in the Display Setup subpane is activated by checking the [Apply]
button.
(4)
The configuration in the [Setup] tab can be set to default (Default is the state in which all
radio buttons on the right hand side of display items are set to “ON”.) by clicking the [Reset]
button.
(5)
By clicking the [OK] button, the current configuration will be activated and the dialog window
will be closed.
(6) By clicking the [Cancel] button, the dialog window will be closed but the current configuration
won’t be activated.
- 78 -
