ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 13/25020-00
ART. 13/25022-00
PAGINA 2 DI 3
Switching Power Supply 75W
13/25020-00 VIC-75-12 – 13/25022-00 VIC-75-24
This power supply is designed for all applications that need an affordable, easy to install and very versatile in its
performance.
.
ATTENTION!
PLEASE READ CAREFULLY THESE INSTRUCTIONS BEFORE INSTALLING THIS ADAPTOR.
Before the testing and powering of electrical / electronic items, it is the responsibility of the installer and the user, make
sure that all rules and regulations are complied.
SAFETY INSTRUCTIONS
1.
Do not short-circuit the terminals of the terminal block.
2.
Make sure the correct supply voltages. A different voltage can damage your equipment.
3.
Do not try to open the cover, inside there are no parts that require maintenance by the user.
4.
When make connections to any equipment, always check very carefully the polarity. Reverse polarity may damage
the power supply and your equipment.
5.
Do not use this power supply with applications that require more than 60W.
6.
Connect the ground to power supply, otherwise in case of malfunctions, the circuits of safety and security are not
able to properly carry out their functions, and this may cause serious damage and injuries to persons and / or
property.
7.
The power supply does not contain parts subject to periodic maintenance. If you have any malfunctions,
immediately turn off the power supply and contact your service center.
TECHNICAL SPECIFICATIONS
Input:
115–230VCA 50-60Hz 1,6-0,8A
Output:
12VCC 6A – 24VCC 3A
Power:
75W
Dimensions:
159x98x38mm
ASSEMBLY INSTRUCTIONS
1. Check that the output voltage is appropriate for your equipment.
2. Connect the power adapter to your device, making sure the polarity is correct.
3. First connect the equipment to the power supply terminal block and after to the AC outlet. Before power on the
equipment check if the electric system is ok.
4. Power on the adaptor.
5. LED on the adaptor power on.
6. Power on the equipment.
This power supply allows to adjust very precisely the output voltage. If need, you have to use the trimmer called "V ADJ"
with an insulated screwdriver, checking the output voltage with a precision voltmeter.
User information ex art. 26 D. 49/2014
The symbol labelled on the appliance (Annex IX D. 49/2014) indicates that the rubbish is subject to “separate collection” and
it has been placed on the Italian market after the December 31, 2010.
The user must therefore assign or (have collected) the rubbish to a treatment facility according to indications by the local
administration, or hand it over to the reseller in exchange for an equivalent new product. The separate collection of the
rubbish and the subsequent treatment, recycling and disposal operations encourage the production of appliances made with
recycled materials and reduce negative effects on health and the environment caused by improper treatment of rubbish.
In the case of very small WEEE (no external dimension more than 25 cm), the user is eligible to get free of charge assignation
to retail shops with sales areas relating to EEE of at least 400 m².
Made in China
IMPORTED AND DISTRIBUTED BY:
ELCART DISTRIBUTION SPA
Via Michelangelo Buonarroti, 46
20093 COLOGNO MONZESE (MI)
ITALY
www.elcart.com - [email protected]
