E L C A R T
servizio automatico documentazione tecnica
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39(0)2/25.11.73.10 Fax ++39(0)2/25.11.76.10 sito internet: www.elcart.com e-mail: [email protected]
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
ART. 28/70900
PAGINA 6 DI 8
PRECAUTIONS
x
Device should ONLY be installed in a horizontal position.
x
Do not install device below a lamp or lighting fixture.
x
Do not install above a power socket.
x
Avoid installing the device behind a door.
x
In the case of breakdown or malfunction, unplug unit and do not tamper with it further.
Eventual repairs should be carried out only at an authorized service center using authorized
replacement parts.
Failing to follow these suggestions could render device unsafe
.
x
During extended periods of disuse, the device should be rendered inoperative by removing
the power cord from the unit after the plug has been pulled from the mains socket. It is
further recommended that parts likely to be dangerous if touched or misused be covered or
otherwise rendered innocuous, particularly for children who might make use of unused
appliances for their little games.
x
Installation should
always
and
only
be carried out by qualified person(s) in full compliance
with all instructions and safety warnings. Poor or sloppy installation could result in damage
to persons, animals and/ or property for which the manufacturer will not be held responsible.
x
The electrical safety of this appliance is guaranteed
ONLY
when it has been correctly
connected to the mains within an approved electrical system that features an effective
grounding system as mandated by electrical safety standards and laws. If there are any
doubts concerning this fundamental security requirement, the wiring and electrical system
should be thoroughly inspected by a qualified electrician before this device is installed. The
manufacturer will not be held responsible for any damage caused within an electrical
system that does not feature appropriate grounding.
x
Verify that the maximum rating of the electrical system, therefore of the socket(s), is
consistent with the maximum indicated on the device’s label.
x
ALWAYS maintain an adequate safety distance between the device and walls/ objects.
Before any type of cleaning or maintenance, ALWAYS disengage unit from electrical source
by removing plug from socket or switching off the mains voltage.
CHARACTERISTICS & FEATURES
1) Protective front grate
2) 2) Heating Elements
3) Power Cord
4) Function Indicator
0-1-2
5) Wall bracket
Fig. 1
