ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 28/2251
PAGINA 30 DI 36
Warnings:
* Before installing the batteries, make sure that the UPS breakers are all turned OFF.
Pay attention to metal objects such as watches, rings and bracelets before connecting
the batteries.
* Be careful to connect the cable with the red pole "+" and the black wire to "-".
* Use certified insulated screwdrivers.
Notes:
- Inductive loads such as motors, fluorescent lights, photocopiers and the like should
NOT be protected by the UPS.
- It 'should be installed upstream of the UPS with a power surge such as lightning
protection.
5) FRONT PANEL
Use the UPS is simple, just read this manual and follow the instructions.
5.1.1 Operating Buttons
(Check italian manual)
ON / OFF b
Press and hold for 1 second to turn and / or turn off the UPS.
ROTATE b
Press and hold for 2 seconds to rotate the display.
SELF-TEST/MUTE + buttons
Press and hold for 1 second in the presence of network diagnostic UPS to start the
car.
Press and hold for 1 second in operation from batteries to silence the buzzer.
Inquiring buttons or Group A is not started:
Press and hold for 1 second (less than 2 seconds): menus appear in the display in
numerical order.
Press and hold for more than 2 seconds: Show sequentially every 2 seconds the
display menus. Pressing and holding again for more time, the display returns to show
the output data.
A Group started:
Press and hold for 1 second (less than 2 seconds): Select the option available.
