DMX Control
The showStore XLan can be controlled via DMX input triggers, triggers described further in the manual. In this
setup menu you can select the DMX (ArtNet) universe that will be used for the control. This universe can come
from the DMX input ports or network.
Use the encoder to select the ArtNet universe
Press A to confim
Press B to disable the DMX input control
Press C to cancel the operation
MIDI / RS-232
The serial control for the showStore XLAn is via MIDI or RS-232. MIDI commands are used for the triggering
system (described further I the manual), RS-232 is used by the ASCII command system (also described further in
the manual).
Use the encoder to adjust the selected value
Press A to confirm
Press B to disable serial control
Press C to cancel the operations
Serial modes are:
•
off
the serial control is disabled
•
MIDI in/thru
MIDI port is enabled and will send commands to the triggering system. The Channel options
selects the MIDI channel to be used. The MIDI output acts like a MIDI thru (direct copy of the input port)
•
MIDI in/out
like MIDI in/thru, except the MIDI output port is reserved.
•
RS-232
the RS-232 sub-d 9pin connector will be used by the ASCII control system. The speed option
sets the baud rate. The RS-232 will use 1 startbit, 8 databits, no parity and 1 stopbit.
Play Routing
Select the up to 4 DMX universes for the show playback.
Use the encoder to adjust the selected output universe
Press the encoder to select the next output universe
Press A to confirm
If the first output universe is selected, pressing B will set the other 3 output universes to +1, +2 ,+3. If output
universe 2 3 4 is selected, pressing B will disable this output universe from the playback.
Press
to cancel the operation
Rec Routing
Select the up to 4 DMX universes used during show recording.
Operation is like Play Routing (above).
Multishow
Up to 4 shows can be in playback at the same time. To enable multishow, select the desired merging option.
Use the encoder to change the multishow mode.
Press A to confirm.
Press B to switch off multishow.
Press
to cancel the operation.
Multishow modes are:
•
Off
Normal operation
•
HTP
the shows running are merged in highest take precedence
•
LTP
the shows running are merged in latest takes precedence. The last show activated has the highest
priority. Is a channel is changed (not zero). The it is used in this showfile.
•
Priority
the shows are merged like LTP, but the priority is fixed. 4 has the highest priority and 1 the
lowest
