ELC showStore XLan, Руководство пользователя

Страница: 2 / 10

Front Panel
The frontpanel has a graphic LC-display, 3 keys and a jog-encoder with push function and 4 LEDs.
Connections at the back
The showStore XLan has many connectivity options. Viewed at the back from left to right:
RS-232 (top SUB-D 9pin)
Pin Description
1 -
2 TX
3 RX
4 -
5 Ground
6-9 -
To connect the RS-232 port to a PC you’ll need an 1 to 1 male/female subd-9pin cable. (NO null-modem / cross
cable)
Contact Closure Inputs (bottom SUB-D 9pin)
Pin Description
1 Ground / Shield
2 Input 1
3 Input 2
4 Input 3
5 Input 4
6-9 Ground
This inputs have an internal pull-up resistor. A simple switch can be connected between the input pin and a ground
pin.
MIDI Out / MIDI In
Midi connection uses standard MIDI pinout.
Network 10/100 MBit Ethernet (on Neutrik Ethercon)
The network connection uses standard UTP network connection.
USB 2.0 Full-speed
The USB conncetion uses standard USB pinout.
DMX output 1+2
Pin Description
1 Ground/Screen
2 Data -
3 Data +
4 -
5 -
The DMX outputs have an internal terminator resistor and are RDM prepared.
DMX Input 1+2
Pin Description
1 Ground/Screen
2 Data -
3 Data +
4 -
5 -
The DMX inputs have an internal terminator resistor.
Timecode SMPTE input (1/4” jack)
Pin Description
Slieve Ground/Screen
Ring
Data -
Tip Data +
The timecode input can receive SMPTE LTC at 24, 25, 29.97 and 30 frames per second. Function will be
implemented in future software release.