•
dual HTP
like single, but merge two DMX universes (primary and
secondary) in highest take precedence.
•
dual LTP
like dual LTP, like dual HTP but in latest takes
precedence (on a channel by channel basis)
DMX port as input
When a port is set up as a DMX input, it can be operation in the following
modes.
•
disabled
the DMX input does nothing
•
normal
any valid DMX is sent onto the network (and internal use)
using the selected universe (ArtNet)
•
backup
the DMX input will not send data if the selected universe
is present on the network. If the selected universe is not present on
the network for several seconds and the input has valid DMX, then it
will send DMX data. If another sender starts sending the same
universe, the input will go back input backup mode.
Please note. DMX input 9 and 10 are always fixed to work as input.
Set ID
Used the encoder to change the current selected digit, and press the
encoder to select the next digit. The digits are in hexadecimal (16
possibilities 0-9, A-F). This means you can have upto 4095 different ID’s in
the system (ID 000 means that the ID is not used ---).
Press A to store
Press B to disable (---)
Press
to cancel the operation
