MonoWave(X) User Manual
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
21 of 26
The Test Mode Menu
This page is useful to checking and testing both the MonoWave(X) and the audio output
equipment connected to it by allowing the MonoWave(X) to
play a sustained note without
having a MIDI signal.
The display will show something similar to the following:-
The currently selected note in the form C#5 where:
C# = the name of the note
5 = the current MIDI octave of the note
Gate ON or OFF, and
The display also shows the MIDI Note number and MIDI Velocity value in the lower right of
the screen.
[
F1+
] to increment the selected note. The note name, octave and MIDI Note value will
change accordingly. If the NOTE values exceeds 96 the program will wrap this around to
the minimum NOTE value of 24.
[
F1-
] to decrement the selected note. The note name, octave and MIDI Note value will
change accordingly. If the NOTE values drops below 24 the program will wrap this around
to the maximum NOTE value of 96
