6 / 8
www.elbro.com
COMMANDS FOR TIME CONTROL (HOUR COUNTDOWN)
”T” – SWITCH FOR HOURS
The SMS Butler can be turned on for a programmable duration, between 1 and 99 hours.
T
followed by the desired number of hours. Always a 2-digit value: 01 = 1 hour, 05 = 5 hours.
E.g.:
“1234 T01” switches relay on for 1 hour.
E.g.:
“1234 T22” switches relay on for 22 hours.
If necessary, use the
R
command to interrupt before the end of the countdown.
”M” – SWITCH FOR MINUTES
The SMS Butler can be turned on for a programmable duration, between 1 and 99 minutes.
M
followed by the desired number of minutes. Always a 2-digit value: 01 = 1 minute, 05 = 5 minutes.
E.g.:
“1234 M01” switches relay on for 1 minute.
E.g.:
“1234 M22” switches relay on for 22 minutes.
If necessary, use the
R
command to interrupt before the end of the countdown.
”P” – “PULSE” FUNCTION (Inverted reset function)
The
P
command will turn the SMS Butler on and keep it on for a number of seconds.
P
followed by the desired number of seconds. 1-9 seconds possible
E.g.:
“1234 P3” switches the SMS Butler on for 3 seconds and then off again.
”U” – RESET FUNCTION
The SMS Butler can be used to reset other equipment.
The
U
command will turn the SMS Butler off and keep it off for a number of seconds.
U
followed by the desired number of seconds. 1-9 seconds possible
E.g.:
“1234 U3” switches the SMS Butler off for 3 seconds and then on again.
ADVANCED COMMANDS
”C” – CHANGE THE PERSONAL ACCESS CODE
Change the current personal access code to a new 4-digit value.
E.g.: “1234 C9898” changes the code from 1234 to 9898.
Note: Remember the new code!
