E-7
OPERATING CD
1 Switch to “CD/MP3/USB” mode, unit will turn “ON” automatically.
2 Pull the protruding position to open CD door (“-“ and present time appears on display)
• Place the disc with label facing up on the disc tray.
• Hold the disc without touching either of its surface position with printed
title side facing up, align it with the guides and place it in its proper
position.
3 Close the CD door unit it “Clicks” (Total track number in Disc on display).
4 Press “PLAY” button Disc play automatically
5 Stopping play
Press “STOP” button once to stop play
• If you press the “PLAY” button again, play starts automatically from first track.
Skip and Searching
Next or Back Button:
Press these buttons to go to the previous / next track
Repeat
The repeat functions that you can enjoy are dependent on the disc types played
CD: All tracks repeat, single track repeat and given
1 Press “MODE” key once.
2 LCD will display “REP” = repeat of 1 track.
3 Press “MODE” key again to repeat all.
4 Press “MODE” key again to random mode.
5 Press “MODE” key again to normal playback.
CD Programming
Up to 20 tracks can be programmed for disc play in any order.
Before use, be sure to press “STOP” button
1 Set “CD/MP3/USB” mode.
2 Press the “PROGRAM” button, the display will show “P01”, moreover, it will
indicate program no. and digits for track no.
3 Select a desired track by using the skip buttons.
4 Press the “PROGRAM” button again to confirm desire track into program.
5 Repeat step 2 and 3 to enter additional memories into the program.
6 When ALL the desired tracks have programmed. Press “PLAY/PAUSE” button
to play the disc in the order you have programmed.
7 Press “STOP” button twice to terminal program play.
