manualshive.com logo in svg

Elba N96 EX 780, Инструкции по использованию - Советы по установке, Страница: 16 / 52

Поделиться
Скачать
Elba N96 EX 780 Скачать руководство пользователя страница 16

16

COOKING WITH FAN ASSISTED 

GAS GRILL 

GAS GRILL AND FAN MOTOR

Switch on the gas grill and the fan motor 

and let the oven to preheat for about 5 

minutes with the door closed.

The heat is mainly diffused by radiation 

and the fan then distributes it throughout 

the oven.

Introduce the food to be cooked positioning 

the rack as close to the grill as possible; the 

dripping pan should be placed under the 

rack to catch the cooking juices and fats.

The fan assisted grill shall be used with 

the oven door closed.
It is recommended that you do not grill 

for longer than 30 minutes at any one 

time.
Attention: The oven door becomes very 

hot during operation.

Keep children away.

COOKING WITH GAS GRILL 

 

WITHOUT FAN MOTOR

GAS GRILL WITHOUT FAN MOTOR

Switch on the gas grill and let the oven to 

preheat for about 5 minutes with the door 

closed.

Introduce the food to be cooked positioning 

the rack as close to the grill as possible; the 

dripping pan should be placed under the 

rack to catch the cooking juices and fats.

The grill shall be used with the oven 

door closed.
It is recommended that you do not grill 

for longer than 30 minutes at any one 

time.
Attention: The oven door becomes very 

hot during operation.

Keep children away.

130

155

180

205

230

Max

+

130

155

180

205

230

Max

+

Fig. 4.9

Fig. 4.8

Содержание N96 EX 780





















































Отзывы:

Нет отзывов