Elba N55 204 Series, Инструкция по использованию

Страница: 26 / 68

26
GAS MAINTENANCE
REPLACEMENT OF BURNER
INJECTORS
If the injectors are not supplied they can
be obtained from the “Service Centre”.
Select the injectors to be replaced accor -
ding to the “Table for the choice of the in-
jectors”.
To replace the injectors proceed as fol -
lows:
•
Remove pan supports and burners
from the cooktop.
• Using a wrench, substitute the nozzle
injectors “ J ” (fig. 7.4) with those most
suitable for the kind of gas for which it
is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
J
Fig. 7.4
ADJUSTING OF THE MINIMUM OF
THE TOP BURNERS
In the minimum position the flame must
have a length of about 4 mm and must re -
main lit even with a quick turn from the ma -
ximum position to that of minimum.
The flame adjustment is done in the fol
-
lowing way:
•
Turn on the burner.
• Turn the tap to the MINIMUM position.
• Take off the knob.
• With a small flat screwdriver turn the
screw inside the tap rod to the correct
regulation (fig. 7.5).
Normally for LPG, tighten up the regu-
lation screw.
Fig. 7.5