Elba ETP-F5082, Руководство пользователя

Страница: 7 / 10

Keep warm
1. The keep warm function will be activated
and the
“keep warm” light indicator (in
green) will turn on after water boiled.
2. Press the
“re-boil” button if cold water had
been added or if you wish to re-boil the
water again.
Dispense hot water
1. Dispense button
a)Press the
“dispense” button to
dispense hot water.
Note: The hot water may not dispense
immediately right after boiling. Keep
pressing until the water is dispensed.
2. Cup switch
a) Push up the cup switch with your cup to
dispense hot water.
Note:

The dispensing function will NOT operate
if the thermo pot is not connected to the
main switch.

CAUTION: Always keep hands or any parts
of your body from the water outlet for a
second or two right after you press the
dispense button.

Do not press the dispense button when the
inner water reservoir is empty.

You cannot dispense hot water by pressing
the dispense button, or cup switch if the
thermo pot is unplugged.
Refill water
When water level is low, add water for
automatic re-boil.

Do not add water above maximum water
level mark.

Boil water with insufficient water may cause
malfunction.