14
IMPORTANT: The cooker must be in
-
stalled in accordance with the manu-
facturer’s instructions.
Incorrect installation, for which the
manufacturer accepts no responsibili
-
ty, may cause damage to persons, ani-
mals and things.
GENERAL
•
Connection to the mains must be carri-
ed out by qualified personnel in accor
-
dance with current regulations.
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical ca-
ble sections can withstand the load
specified on the plate.
•
The appliance can be connected di-
rectly to the mains placing an omni-
polar switch with minimum opening
between the contacts of 3 mm betwe-
en the appliance and the mains.
•
The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
•
Once the appliance has been installed,
the switch must always be accessible.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system, call an expert.
He should also check that the cable section
is suitable for the power absorbed by the
appliance.
IMPORTANT: This cooker must be con
-
nected to a suitable double pole control
unit adjacent to the cooker.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sability for any inconvenience resul
-
ting from the inobservance of this con
-
dition.
ELECTRICAL SECTION
7
