Elba EHS 635 SB, Инструкции по использованию - Советы по установке

Страница: 19 / 28

19
GAS SECTION
4
GAS INSTALLATION REQUIREMENTS
Important !
•
Before installation, make sure that the local distribution conditions (gas type and
pressure) and the adjustment of this appliance are compatible. The appliance
adjustment conditions are given on the plate or the label.
•
This appliance must be installed and serviced only by a suitably qualified,
registered installer with technical knowledge of both gas installation and
electricity. The installation or service must comply with the current editions of
the applicable standards, regulations, and codes of practice governing gas and
electrical installations.
•
Failure to install the appliance correctly could invalidate any manufacturer’s
warranty.
This appliance is supplied for use on LPG.
It is adjusted for this gas only and cannot be used on any other gas (TOWN GAS, NATURAL
GAS) without modification.
•
The appliance is manufactured for conversion to TOWN GAS.
The TOWN GAS conversion kit is supplied with the appliance.
•
The appliance is manufactured for conversion to NATURAL GAS.
The NATURAL GAS conversion kit can be purchased as a separate kit.
CONNECTING THE COOKTOP TO THE GAS SUPPLY
• The gas connection must be carried out by an authorised person according to
the relevant local standards.
• Ensure that the room in which the cooktop is to be installed is adequately
ventilated, in compliance with applicable regulations.
• Note: Connection to the gas supply may be made using either a rubber hose
(where permitted) or by using a flexible hose or rigid pipe.