Elba EGSI-A2216, Руководство пользователя, Страница: 5 / 10

5
3. Ironing instructions

Fig 12 & 13: Pull the plug from the product body and connect the plug into the
wall outlet and switch on the power. You will hear a “beep” sound. The steam
indicator light on the power switch will on (in red).

Fig: 14: After the steam indicator lamp is on, step the foot switch for different
garment steam pressure. At this stage, you will hear a boiling sound from the
appliance. This is normal as the appliance pump the water into the boiler and
when the water fill into the hot boiler will cause the sound. Press the steam
control button at the steam head and the appliance will start to generate
steam for ironing after a few minutes.
Caution: Do not direct the steam head toward yourself.

Fig 15: When the steam comes out from the steam head, you may apply it for
ironing. Please hold the steam head and do not contact your body with the
steam tube. Use the steam head vertically and gently iron at the position of
up and down.

Fig 16: After operating the appliance, turn off the power and press the cord
rewinder switch. Dump the remaining water inside the water tank, and let the
appliance dry for 5 minutes.
WARNING! Be careful when empty the water tank after use as there may be
hot water in the reservoir.
4. Steam pressure switch, cord rewinder switch and steam control button
 Fig 17: Switch function:
(i) Adjustable two level steam pressure switch / power switch-
Yellow light is for normal steam pressure.
Green light is for strong steam pressure.
(ii) Cord rewinder switch-
To rewind the cord after use.
 Fig 18: Steam Control button:
To pump the water from the product body to the steam head to generate
steam.
5. Accessories instruction

Brush

By using the brush, the steam can easier infiltrate into the cloth.

Before removing the brush, please switch off the power. Make sure no steam
is coming out from the steam head and then only remove the brush from the
steam head.