Elba EEC 863, Инструкция по использованию

Страница: 32 / 36

32
Fig. 9.1
PE N L
1
(L
2
)
Fig. 9.2
ELECTRICAL FEEDER CABLE CONNECTION
The operations must be executed by a qualified technician.
To connect the supply cable:
• Remove the screws securing the cover “ A ” on the rear of the cooker (fig. 9.1).
• Feed the supply cable through the cable clamp “ C ” (fig. 9.1). The supply cable must
be of a suitable size for the current requirements of the appliance; see the section
“Feeder cable specifications”.
• Connect the wires to the terminal block “
B
” as shown in the diagram in figure 9.2.
• Take up any slack in the cable and secure with the cable clamp “
C
”.
• Replace the cover “ A ”.
Note: The earth conductor must be left about 3 cm longer than the others.
FEEDER CABLE SPECIFICATIONS
TYPE H05RR-F
Models EEC 863 ..
230 V~ 3 x 1,5 mm
2
(*) (**)
Models EEC 963 ..
230 V~ 3 x 2,5 mm
2
(**)
(*) Connection possible with plug and outlet
(**) Connection with wall box connection
A
B
C
230 V~