Elba EAC-B1492RC(WH), Руководство пользователя

Страница: 4 / 7

ASSEMBLY INSTRUCTIONS
1. Remove all packaging material from the product.
2. Assembling the castors: Place the product on a flat surface. Place the castors
provided to the bottom of the unit and twist by hand.
3. When filling up the water into the water tank, pay high attention to the water level to
avoid spillage.
4. The water level
in the water tank should not exceed “Max” level when operating.
5. To increase the effectiveness of cooling, you can add ice water with ice cubes into the
water tank. Remarks: Do not add detergent, chemical, perfume, or any other mixing
agents into the water tank. It will cause blockage and damage to the water pump. Only
use clean water for cooling.
OPERATING INSTRUCTIONS
ON / OFF : To turn on / off the unit.
IONIZER : To turn on / off the ionizer emitter.
MOSQUITO : To turn on / off the mosquito repellent.
SPEED
: To select the circulating speed Low, Medium and High of the unit.
MIST : To turn on the mist projected from the unit.
SWING
: To swing the front ventilation grille of the unit.
MODE : To select the wind mode from Normal, Natural and Sleep wind.
TIMER : This unit has 9 hours timer function. Press to select the timer to turn off
with every 1 hour interval.
REMOTE CONTROL
Fit two AAA batteries into the remote control. There are 6 function keys on the remote
control. It has the same function as the control panel. The maximum range to operate the
remote control is within the range of 5 meters.
Notice:
When the remote control is not in use, please remove the batteries. Do not mix new
and used batteries in the remote control.