33
FEEDER CABLE SECTION
TYPE H05RR-F
230 V
3 x 1,5 mm
2
REPLACEMENT OF THE ELECTRICAL
FEEDER CABLE
To connect the supply cable:
– Remove the screws securing the
cover “A” on the rear of the cooker.
– Feed the supply cable through the
cable clamp “D”. The supply cable
must be of a suitable size for the
current requirements of the appliance;
see the section “FEEDER CABLE
SECTION TYPE HO5 RRF”.
– Connect the phase wires to the
terminal block “B” and the earth wire
to the terminal “PE” (fig. 9.1).
– Take up any slack in the cable and
secure with the cable clamp “D”.
– Replace the cover “A”.
230 V
(L )
L
PE
N
1
2
Connect the phase and earth cables to
terminal B according figure 9.1.
The wires of this appliance must be
coloured in accordance with the following
code:
GREEN AND YELLOW
-
EARTH
BLUE
-
NEUTRAL
BROWN
-
LIVE
The wire which is coloured GREEN AND
YELLOW must be connected to the
terminal which is marked with the letter
“E” or by the earth symbol
or
coloured GREEN or GREEN AND
YELLOW.
The wire which is coloured BLUE must
be connected to the terminal which is
marked with the letter “N” or coloured
BLACK.
The wire which is coloured BROWN
must be connected to the terminal which
is marked with the letter “L” or coloured
RED.
Fig. 9.1
D
B
PE
A
;;;
;;;
;
;
;
;
;
;
;
;
;
;;