
24
Fig. 7.1
7 - INSTALLATION
INSTALLATION
This cookers has class “2/1” overheating protection so that it can be installed in a
cabinet.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered syntetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
The appliance must be kept no less than 50 mm away from any side wall which
exceed the height of the cooktop (fig. 7.1).
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a
room containing a bath or shower.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
The cooker is equipped with a 4 levelling feet which must be fitted to the base of the
cooker.
It is essential that the cooker is positioned as stated below.
If the cooker is located on a pedestal it is necessary to provide safety measures to pre-
vent it falling out.
The cooker must be installed by a qualified technician and in compliance with local
safety standards.
650 mm
450 mm
50 mm
500 mm