5
6
Step 5:
Matching the bracket to the holes
of the inner duct cover and fix it
well with M4 screws.
Step 6:
Insert the inner duct cover into the
outer duct cover.
Please kindly note that the inner
duct cover must fix to the outer
duct cover
’
s orientation slot.
Step 7:
Put the outer duct cover to the unit
body, and use two M4x10 screws
to fix the outer duct cover to the
unit body.
Step 8:
1. Draw the inner duct cover up to
the suitable high, mark on the wall
two keyhole of the outer duct cover
bracket with a pen .
2. Put down the inner duct cover
gently, drill the keyholes in 60-70
mm depth on the horizontal level
using 8mm drill.
3. Press the expanding tube provided
into the holes.
4. Matching the inner duct cover with
the holes, tighten the inner duct
cover with two 5x60 wood screw
provided
Step 9:
Extend the air outlet of the exhaust
pipe out-of-door. Try to make the
bend of the exhaust pipe is more
than 120
°
.
Step 10:
Install grease filter. Match the fix
pin to the fix hole and button the
filter gently as the direction of arrow
A.
Fix pin
Fix hole
A
direction
Step 4:
Take out the cooker hood from
the carton and put it on a horizon-
tal work table gently. Fix the reducer
pipe into the air outlet of the inner
duct, and then fix the exhaust pipe
into the top of reducer,make sure it is
connected to the reducer tightly.
Exhaust pipe
Air outlet
Bracket
Inner duct
cover
M4 Screw
Inner duct cover
Outer duct cover
K
K
Orientation Slot
Inner duct cover
Outer duct cover
fix screws
5x60
Wood Screw
Expanding Tube
5x60
Wood Screw
Expanding Tube
