2
9
MAIN PARTS NAME
INSTALLATION REQUIREMENT
1. Do not install the cooker hood where there are many doors or windows
in other to avoid to effecting the exhaust efficiency of the hood caused
by air convection. (Fig. 1)
CAUTION: LAMP UNIT MAY BE HOT!WAIT UNTIL
AND USE THE SAME TYPE LIGHT BULB!
UNIT IS COOL.
Make sure all control switches are off,and cooker hood is unplugged.
Pls follow below instructions:
TO REPLACE LIGHT BULB
1. Use a flat head screwdriver to pop out the lamp subassembly, then
disconnect lamp from the internal wires.
2. Unloose the screw using cross head screwdriver.
3. Remove the lamp cover and take out of lamp bulb.
4. Replace a new 2W lamp bulb, push bulb securely into light socket.
5. Replace the lamp cover, fix it with screws.
6. Connect the lamp subassembly with internal electrical wire and push the
light into the hood lamp hole.
Warning! Make sure the bulb has cooled before you touch it !
10. The same way to take out the other fan.
11. After clean, please assemble it like the opposite ways of loose it.
Note: Left motor fixed cover and fan have a little difference from right
side ,there is a letter
＂
R
＂
on the right side cover and a letter
＂
L
＂
o
n th
e le ft side cover. D on
’
t ass em
bl e it in w
rong side.
Blower box
Glass
Filter
Inner duct cover
Outer duct cover
Duct bracket
Exhaust pipe
