12
INSTALLATION
Technical information for
the installer
The appliance must be installed by a
qualified electrician following the manu-
facturer's instructions and in compliance
with local regulations in force.
To fit the cooktop into the unit make an
opening of the dimensions given in the
figure, remembering that:
– inside the unit there must be a space
of at least 30 mm between the bottom
of the cooktop and the top of an
appliance or bracket.
– any wall to the side and above the
cooktop must be at least 50 mm
away.
– the wall behind the cooktop must be
at least 50 mm away.
– when there is a wall unit or hood
above the cooktop there must be at
least 650 mm between the cooktop
and the unit or hood.
– the coatings of the walls of the unit or
appliances near the cooktop must be
heat resistant (“Y” protection against
heating in compliance with standards
EN 60335 2 6). The cooktop can then
be put near to walls which are higher
than it is (min. 50 mm).
Do not install the appliance near
inflammable materials (eg. curtains).
650 mm
50 mm
450 mm
Содержание AS E30-020
