40
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must be
interrupted.
IMPORTANT: The cooker must be
installed in accordance with the
manufacturer’s instructions.
Incorrect installation, for which
the manufacturer accepts no
responsibility, may cause damage to
persons, animals and things.
GENERAL
•
Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical
cable sections can withstand the load
specified on the plate.
•
The cooker can be connected directly
to the mains placing an omnipolar
switch with minimum opening between
the contacts of 3 mm between the
appliance and the mains.
•
The power supply cable must not touch
any hot parts and must be positioned
so that it does not exceed 75°C at any
point.
•
Once the cooker has been installed,
the switch must always be accessible.
•
If the power supply cable is damaged
it must be substituted by a suitable
cable.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system, call an expert.
He should also check that the domestic
electrical system is suitable for the power
absorbed by the appliance.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all
responsibility for any inconvenience
resulting from the inobservance of this
condition.
ELECTRICAL SECTION
8
