Elation TVL1000 Скачать руководство пользователя страница 10

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 

prior written notice.

 TVL1000    

   

                               Specifications

Model: 

 

  TVL1000

Voltage: 

 

 

100 - 240V~50/60Hz

LEDs:   

 

 

400 LEDs (200 Cool White & 

    200 

Warm 

White) 

Power Consumption: 

26W

Fuse:   

 

 

7A

Power Cord Daisy Chain:  12 Fixtures Max.

Dimensions:    15.9”(L) x 13.7”(W) x 4.4”(H)

 

 

 

 

406mm x 350mm x 113mm

Weight: 

 

 

13.6 Lbs. / 6.2 kgs.

Colors: 

 

 

Cool White & Warm White

Duty Cycle:   

 

None

DMX:   

 

 

3 DMX Channel Modes: 2 Channel    

 

 

 

 

Mode, 2 Channel Mode, & 3 Channel  

    Mode

Sound Active:  Yes

Working  Position:   

Any Safe, Secure Position

Warranty: 

 

 

2 Year (730 days)

Auto Sensing Voltage:

 This fixture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the 

power source.

©Elation Professionals® 

A Division of the AmericanDJ® Group of Companies

World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-3322 Fax: 323-832-9142

Web: www.elationlighting.com  E-mail: [email protected]

©Elation Pr

o

fessionals®  -  www.elationlighting.com  - TVL1000 Instruction Manual Page 19

 TVL1000    

 

 

                             Warranty

2-YEAR LIMITED WARRANTY

A.  Elation® Architectural hereby warrants, to the original purchaser, Elation® 

Professionals® products to be free of manufacturing defects in material and 

workmanship for a period of two years (730 days) from the date of purchase. This 

warranty shall be valid only if the product is purchased within the United States 

of America, including possessions and territories. It is the owner’s responsibility 

to establish the date and place of purchase by acceptable evidence, at the time 

service is sought. 
B.  For warranty service, send the product only to the Elation® Professionals® 

factory. All shipping charges must be pre-paid. If the requested repairs or ser-

vice (including parts replacement) are within the terms of this warranty, Ela-

tion® Professionals® will pay return shipping charges only to a designated point 

within the United States. If the entire instrument is sent, it must be shipped in 

its original package. No accessories should be shipped with the product. If any 

accessories are shipped with the product, Elation® Professionals® shall have no 

liability whatsoever for loss of or damage to any such accessories, nor for the 

safe return thereof.  
C.  This warranty is void if the serial number has been altered or removed; if the 

product is modified in any manner which Elation® Professionals® concludes, 

after inspection, affects the reliability of the product; if the product has been 

repaired or serviced by anyone other than the Elation® Professionals® factory 

unless prior written authorization was issued to purchaser by Elation® Profes-

sionals®; if the product is damaged because not properly maintained as set forth 

in the instruction manual. 
D.  This is not a service contract, and this warranty does not include mainte-

nance, cleaning or periodic check-up. During the period specified above, Ela-

tion® Professionals® will replace defective parts at its expense, and will absorb 

all expenses for warranty service and repair labor by reason of defects in mate-

rial or workmanship. The sole responsibility of Elation® Professionals® under 

this warranty shall be limited to the repair of the product, or replacement thereof, 

including parts, at the sole discretion of Elation® Professionals®. All products 

covered by this warranty were manufactured after January 1, 1990, and bear 

identifying marks to that effect. 
E.  Elation® Professionals® reserves the right to make changes in design and/or 

improvements upon its products without any obligation to include these changes 

in any products theretofore manufactured. 
F.  No warranty, whether expressed or implied, is given or made with respect to 

any accessory supplied with products described above. Except to the extent 

prohibited by applicable law, all implied warranties made by Elation® Profession-

als® in connection with this product, including warranties of merchantability or 

fitness, are limited in duration to the warranty period set forth above. And no war-

ranties, whether expressed or implied, including warranties of merchantability or 

fitness, shall apply to this product after said period has expired. The consumer’s 

and or Dealer’s sole remedy shall be such repair or replacement as is expressly 

provided above; and under no circumstances shall Elation® Professionals® be 

liable for any loss or damage, direct or consequential, arising out of the use of, 

or inability to use, this product. 
G.  This warranty is the only written warranty applicable to Elation® Profession-

als® Products and supersedes all prior warranties and written descriptions of 

warranty terms and conditions heretofore published. 

Содержание TVL1000











Отзывы: