Elation TVL1000 Скачать руководство пользователя страница 1

©Elation Pr

o

fessionals®  -  www.elationlighting.com  - TVL1000 Instruction Manual Page 2

  TVL1000         

                                         General Information

Unpacking: 

Thank you for purchasing the TVL1000 by Elation Pro-

fessionals

®

. Every TVL1000 has been thoroughly tested and has been 

shipped in perfect operating condition. Carefully check the shipping 

carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all equipment necessary to operate the unit has 

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Please do not return this unit to your dealer without con-

tacting customer support first. 

Introduction: 

The TVL1000 DMX intelligent LED fixture. The TVL1000 

has 3 DMX Modes; Two 2 Channel Modes, and a 3 Channel Mode. The 

fixture has two operating modes; manual mode  or DMX controlled. 

The TVL1000 can only be run as stand alone unit. This unit is suitable 

for theaters, studios, retail stores, and other similar locations. For best 

results use fog or special effects smoke to enhance the light projec-

tions. 

Customer Support:

 Elation Professionals

®

 provides a toll free cus-

tomer support line, to provide help and to answer any question should 

you encounter problems during your set up or initial operation. You 

may also visit us on the web at www.elationlighting.com for any com-

ments or suggestions. Service Hours are Monday through Friday 8:00 

a.m. to 4:30 p.m. Pacific Standard Time.

 

Voice:   

(323) 582-3322

 

Fax:    

(323) 832-9142

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.elationlighting.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

User Instructions

TVL1000

 Rev. 2/13

Содержание TVL1000











Отзывы: