Elation SMARTY HYBRID, Руководство пользователя

Страница: 8 / 42

www.elationlighting.com
8
D I S C H A R G E L A M P W A R N I N G
This fixture is fitted with a DISCHARGE LAMP, which is highly
susceptible to damage if improperly handled. NEVER touch the lamp
with your bare hands, as the oil from your hands will shorten the life of
the lamp.
NEVER
move the fixture until the lamp has had ample time
to cool. DISCHARGE LAMPS are NOT covered under warranty
conditions. Avoid switching the fixture ON and OFF repeatedly in short
intervals, as this will reduce lamp life and intensity. To achieve the
intensity associated with discharge lamps, these lamps use gas sealed
in a high-pressure environment to emit a brilliant output.
Due to the high pressure involved with the construction of the lamp, it
MAY EXPLODE
DURING PROLONGED EXTENSIVE USE
. This risk is increased with age; added care is
encouraged when dealing with older lamps. Thus, the lamp must always be replaced at the
end of their recommended duty cycle. Extreme caution should be used when operating this
or any fixture fitted with a gas discharge lamp.
UV RADIATION NOTICE
THIS FIXTURE EMITS INTENSE UV RADIATION, WHICH IS HARMFUL
TO THE EYES AND SKIN. THE INTENSE LUMINANCE OF THE LAMP
CAN CAUSE SEVERE DAMAGE TO THE RETINA. NEVER OPERATE
THIS FIXTURE WITH ANY OF THE PROTECTIVE COVERS REMOVED.
THESE COVERS HAVE BEEN SPECIALLY DESIGNED TO SHIELD
AGAINST UV RADIATION.
LAMP REPLACEMENT
THE PHILIPS™ MSD PLATINUM 200 FLEX LAMP MUST BE REPLACED
EVERY 6,000 HOURS OR WHEN DAMAGED AND/OR DEFORMED!
USE ONLY GENUINE ORIGINAL PHILIPS™ LAMPS. OTHER BRAND
LAMPS WILL CAUSE DAMAGE AND WILL VOID FIXTURE WARRANTY!
DISCONNECT THE MAIN POWER SUPPLY BEFORE REPLACING LAMP!
FIXTURE MUST COOL FOR 60 MINUTES BEFORE REPLACING LAMP!
NEVER TOUCH LAMP WITH BARE HANDS, ALWAYS WEAR GLOVES!
OIL FROM HANDS WILL SHORTEN LIFE OF LAMP!
MAKE SURE ALL COVERS/PANELS ARE REPLACED/SECURED BEFORE
OPERATING FIXTURE TO PREVENT ANY RISK AND/OR DAMAGE TO EYE
RETINA FROM UV RADIATION EXPOSIURE!