Elation PLATINUM SPOT 15R PRO Скачать руководство пользователя страница 3

Страница: 3 / 60

Platinum Spot 5R Pro™

©Elation Professional, Los Angeles, Ca 3

www.ElationLighting.com

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Platinum Spot 5R Pro™ has been

designed to perform reliably for years when the guidelines in this booklet are followed.

Please read and understand the instructions in this manual carefully and thoroughly before

attempting to operate this unit, this fixtures uses a unique lamp that has very specific

guidelines that must be strictly followed.Themanual contains important information

regarding safety protocol that must be strictly adhered to at all times.

UNPACKING: Thank you for purchasing the Platinum Spot 5R Pro™ by Elation

Professional®. Every Platinum Spot 5R Pro™ has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping carton for damage that

may have occurred during shipping. If the carton appears to be damaged, carefully inspect

your unit for damage and be sure all accessories necessary to operate the unit have arrived

intact. In the event damage has been found or parts are missing, please contact our

customer support team for further instructions. Please do not return this unit to your dealer

without first contacting customer support at the number listed below.

CUSTOMER SUPPORT:Elation Professional

provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 8:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(323)

582-3322

Fax: (323)

832-9142

E-mail:

[email protected]

Forum:

www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution!There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle whenever possible.

Содержание PLATINUM SPOT 15R PRO





























































Результаты поиска

Содержание PLATINUM SPOT 15R PRO

Отзывы:

Похожие инструкции для PLATINUM SPOT 15R PRO

Бренды по названию

Популярные бренды

Elation PLATINUM SPOT 15R PRO, Руководство пользователя

Результаты поиска

Содержание PLATINUM SPOT 15R PRO

Отзывы:

Похожие инструкции для PLATINUM SPOT 15R PRO

Бренды по названию

Популярные бренды