19
www.elationlighting.com
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to
“Slave 1”
in the menu
“Set to
Slave”
, the Master unit sends
“Auto Program Part 1”
to the Slave unit.
If set to
“Slave 2”
, the Slave unit receives
“Auto Program Part 2”
.
To start an Auto Program proceed as follows:
1. Slave Setting
U.=D=;L
“Function Mode”
.
U+J=KK
ENTER
to confirm.
U.=D=;L
“Set to Slave”
.
U+J=KK
ENTER
to confirm.
U.elect
“Slave 1”
,
“Slave 2”
or
“Slave 3”
.
U+J=KK
ENTER
to confirm.
U+J=KK
MODE/ESC
in order to return to the main menu.
2. Automatic Program Run
U.=D=;L
“Function Mode”
.
U+J=KK
ENTER
to confirm.
U.=D=;L
“Auto Program”
.
U+J=KK
ENTER
to confirm.
U.elect
“Master”
or
“Alone”
.
U+J=KK
ENTER
to confirm.
U+J=KK
MODE/ESC
in order to return to the main menu.
Содержание PLATINUM 1200 WASH
Страница 1: ...PLATINUM 1200 WASH user manual E L A TI ON PLATINUM 1200 WASH user manual...
Страница 38: ......
