Elation Professionals - wwww.ElationLighting.com Page
23
5
5
Maintenance and Cleaning the
MINI PATEND
MINI PATEND
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not build up on or within the fixture. Otherwise the fixture's light-output will be
significantly reduced. Regular cleaning will not only ensure the maximum light-output but will
also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please contact
your local dealer.
5.1 Safety Regulations
•
Disconnect the main power supply!
•
Wait min. 20 minutes after the last operation to cool down the fixture.
•
Before you put the
MINI PATEND
MINI PATEND
back into operation close the casing, otherwise
your retina can be hurt!
5.2 Circumference and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment. Therefore no general
guidelines can be given. From this it follows that the intervals are only suggestions
from our practice experience.
Position
Interval
In this way
Outside optic
Weekly
Soft cloth and glass cleaning fluid
Color filter
Monthly
Soft cloth and glass cleaning fluid
Gobos
Yearly
Vacuum cleaner, airbrush, etc.
Glass gobos
Monthly
Soft cloth and glass cleaning fluid
Prism
Monthly
Soft cloth and glass cleaning fluid
Dimmer/Shutter
Yearly
Vacuum cleaner, airbrush, etc.
Inside lens
Monthly
Soft cloth
no
glass cleaning fluid
Fan and air channel
Monthly
Vacuum cleaner, airbrush, etc.
Reflector
Never
Lamp
Never
Moveable parts
Yearly
Suitable fatty oil
