Elation Professionals - wwww.ElationLighting.com Page
12
2.1 Adjust the DMX- Address
Right after turning on the
MINI PATEND
MINI PATEND
you can see the current DMX- address. If
there is no DMX- signal the display flashes.
D001
For the address setting please follow this procedure:
1. Switch ON the
MINI
MINI
PATEND
PATEND
and wait until the fixture reset has finished (
'
RESE
'
is flashing in the display).
2. Press the
Mode-button
in order to access the main menu. Browse through the
menu by pressing the
Up/Down-buttons
until the display shows
D001
. Confirm by
pressing the
Enter-button
(the decimal point is flashing).
3. Use the
Up/Down-buttons
to select the desired address. Confirm the setting by
pressing the
Enter-button
(the display shows
OK
) or press the
Mode-button
to
cancel.
The DMX- address is stored also while switching off the
MINI PATEND
MINI PATEND
!
2.2 The Audio Program
Audi
The
Audio-
menu allows you to run a stand-alone audio program. This chaser can run
either fast or slow.
AFST
: Every sound impulse is one step of the chaser.
ASLW
:
Every second sound impulse is one step of the chaser.
If you want to run the systems simultaneously, one of the
MINI
MINI
PATEND’s
PATEND’s
must be
selected as the master. All others must be "Slave" Master = OFF.
Notice:
The Audio function is only working when
NO
DMX is connected. This can work
as an emergency program.
2.3 The Test Program
TEST
