1
2
3
4
5
1
2
3
4
5
POWER IN:
100-240V~, 50/60Hz
FUSE:
T3.15A 250V 5x20mm
Power Consumption:
90W max.
WARNING: / ATTENTION:
DRY LOCATIONS
EMPLACEMENTS SECS
NOT FOR RESIDENTIAL / HOUSEHOLD USE.
PAS POUR USAGE RESIDENTIEL / MENAGE.
RISK OF FIRE AND ELECTRIC SHOCK
RISQUE DE CHOC ELECTRIQUE ET INCENDIE
O
FOR SUPPLY CONNECTION S USE WITH WIR E RATED AT LEAST 60 C
POUR LES CONNEXIONS D'ALIMENTATION D E FIL D'UNE NOTATION
O
MINIMALE DE 60 C
MINIMUM SAFE TY DISTANCE TO FLAMMABLE MATERIALS: 0.2m.
DISTANCE DE SECURITE AUX MATERIAUX COMBUSTIBLES: 0.2m.
O
MAXIMUM OPERATING TEMPERATURE OF ENCLOSURE SURFACE IS 60 C
O
TEMPER ATURE DE FONCTIONNEMENT
DE SURFACE ENCEINTE EST A 60 C
FUSE
POWER
MODE
MENU
RDM/DMX
POWER
UP
DOWN
Made in China
RDM/DMX OUT
POWER THRU
(15A Max.)
Earth
Neutral
Live
RDM/DMX IN
POWER IN
(15A Max.)
Earth
Neutral
Live
Safety chain/cord
attachment point
Safety chain/cord
attachment point
1=Ground
2=Data-
3=Data+
4,5=NC
1=Ground
2=Data-
3=Data+
4,5=NC
MODE
MENU
DISPLAY
DMX
Program
Address
Channel
No DMX
Glide
Program
Speed
Master
Lamp Mode
Fade Time
001 -- 512
07 / 08 / 10 / 11 / 16
OFF / Hold / Program
OFF / ON
Full / 01-- 16 / Auto
01 -- 100
00 -- 100
Tungsten / LED
00 -- 100
o
40 C
0.2m
Lumina Strip
FOR SAFETY INSTRUCTION AND MOUNTING OPTIONS REFER TO USER MANUAL
4
1
Layout Overview
1. Lamp:
Totally 10 LEDs* Warm White, 7W
1. LCD Display
This multi-function display will detail all DMX Address, Chase , Program, Speed activity that pertains to the
current operation mode of the unit.
2. Mode button
This button will call up the unit operation mode between DMX and Chase mode.
3. Menu button
This button will active the different functions in Receive and Chase modes.
Front Panel Overview
Rear Panel Overview
6
8
2 3 4 5
7
9
10
1
11
Note: In the Chase mode, Menu key is used to only activate Chase Dimmer, Chase Program, Chase Speed,
Fade Time and Lamp Mode. While in the " Receive " mode, only used to only select DMX Address, Channel.
4. UP button
This button will increase the displayed value in the LED display.
5. Down Key
This button will decrease the displayed value in the LED display.
6. DMX Out
This connector sends your DMX signal through to the next unit.
7. DMX In
This connector accepts your DMX input signal.
8. Power Input:
AC100-240V~50/60Hz, Max15A. The supply power is input into your unit via this connector. Be sure to
always connect to proper voltage.
9. Power Thru:
AC100-240V~50/60Hz, Max15A. This connector sends the supply power to the next unit.
10. Fuse:
F3.15A 250V 5*20mm. These fuses prevent you from overloading damaging your unit. Be sure to always
replace with the exact same type fuse.
11. Power Switch:
Turn on/off the power supply.
Lumina Strip
