2. Selecting the DMX Channel
NOTE:
1. When CH:07 is displayed, overall channels will be controlled by one DMX channel.
2. When CH:08 is displayed, channel 1 and 2 will be controlled by one DMX channel, channel3 and 4 will
be controlled by one DMX channel, and so forth, channel 9 and 10 will be controlled by another .
3. When CH:10 is displayed, channel1~10 will control an individual LED fixture.
4. When CH:11 is displayed, each channel will be controlled by one DMX channel. This is the factory
5. When CH:16 is displayed, 1-10 will control the LED, and the 11-16 will control to run a special
program.
default setting.
1. Selecting DMX Address
Press “MENU” button and select DMX channel address menu after having
activated the Receive Mode. The DMX Address Mode is indicated by
"Address” followed by three digits 001~ 512. You can tap the “UP” and
“DOWN” buttons to change the DMX Address Value.
Note: There is no DMX input in the master unit of the connection.
Address
001
Channel
01
MODE MENU UP DOWN
MODE MENU UP DOWN
Press “MENU” button and select Channel Mode. The Channel Mode is
indicated by "Channel" followed by two digits 07,08, 10, 11,16. You can tap
the "UP” and "DOWN" buttons to change the setting from 07, 08, 10,11 or
16 which you wish to run.
Channel Parameter details
：
Functions
Dimmer
DMX
value
0
---
100
%
equal to intensity
0
---
100
%
Program
DMX
0
--
7 for local DMX
Dimmer Mode
DMX
8
--
15 Full
DMX
16
--
23
Program1
DMX
24
--
31
Program2
DMX
32
--
39
Program3
…
DMX
136
--
143
Program16
DMX
144
--
255 Auto
Speed
The bigger DMX value is,
the faster the Programe runs
FadeTime
DMX value
0
---
100
%
equals to
FadeTime
0
---
100
%
LampMode
DMX
0
--
127
for choosing the work mode of the LED
DMX
128
--
255
for choosing
Tungsten
Play
Mode
DMX
0
--
80
to stop the Program
DMX
81
--
160
to pause the Program
DMX
161
--
255
to play the Program
Master
DMX value
0
---
100
%
100
%
equals to Program intensity
0
---
Parameters
13
Lumina Strip
