Operation Guide
This is a High-Tech product. When you are sure you have set
up this unit properly, you can operate this unit freely.
1. Always be sure to mount this unit in the area that will allow
proper ventilation.
2. Check that the local power outlet match that of the required
voltage of your unit.
3. Plug this unit into the AC power outlet, turn the switch on.
4. The lamp will be lit and the cooling fan will start immediately.
Important!
Never disconnect or reconnect the power frequently during operation,
this will shorten the lamp life.
Wait at least 10 minutes to cool down the lamp completely before
restarting this unit. (the warm lamp will cause the igniter holding the
lamp in a glow state.)
6
7
Fixed Gobo Holder & 6 Metal Gobos
The ISP-300 comes with a fixed gobo holder and 6 metal gobos.
These 6 metal gobos are illustrated as follows:
(Dia. 51.5 mm)
fixing plate
supporting plate
metal gobo
mounting
Gobo pattern & Image
The mirror on the wall, floor etc. is subject to the gobo pattern.
Please note the gobo pattern should be inverted so that the image
can be acceptable.
