Elation EZ KLING, Руководство пользователя

Страница: 7 / 20

w w w . e l a t i o n l i g h t i n g . c o m .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
" " " " " " " " " " " " " " " " " " " " "
EZ.KLING
™.
User.Manual.Version.1
S A F E T Y G U I D E L I N E S
The EZ KLING
™
is an extremely sophisticated piece of electronic equipment.
To guarantee a smooth operation, it is important to follow the guidelines in
this manual. The manufacturer of this device will not accept responsibility
for damages resulting from the misuse of this device due to the disregard of
the information printed in this manual.
This device falls under
PROTECTION CLASS 1 . It’s essential this device is
grounded properly, and only qualified personnel perform all electrical
connections.
•
For proper operation, only qualified and certified personnel should perform installation of this
device. Do not attempt installation and/or operation without proper knowledge how to do so.
Any modifications to this device will void the warranty and increase the risk of damage and/or
personal injury.
•
Always disconnect from main power source before performing any type of cleaning procedure
and/or when this device is not in use. Only handle the power cord by the plug end, never pull out
plug by tugging wire the cord.
•
Do not operate device if the power cord has become frayed, crimped and/or damaged. If the
power cord is damaged, replace it immediately with a new one of similar power rating.
•
N E V E R O P E N D E V I C E W H I L E I N U S E !
•
DO NOT operate device in locations above 113°F (45°C) or below 14° F (-10° C) .
•
DO NOT operate device in areas subject to extreme vibrations or bumps.
•
Please make sure there are NO FLAMMABLE MATERIALS close to this device while operating, to
prevent any fire hazard.
•
Do not permit operation by persons who are not qualified for operating this type of device. Most
damages are the result of operations by nonprofessionals.
•
Use the original packaging and materials to transport this device in for service.
•
DO NOT attempt installation and/or operation without knowledge how to do so. Most damages
are the result of operations by nonprofessionals.
•
DO NOT shake device, avoid brute force when installing and/or operating.
•
When installing device overhead in a suspended location, always install with an appropriate
safety cable. When installing the fixture in a suspended environment, always use mounting
hardware that is no less than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged
screw holes in the bracket of the device.
•
Use the original packaging and materials to transport the device in for service.