©
Elation
®
- www.elationlighting.com - Event Par System™ User Manual Page 15
©
Elation
®
- www.elationlighting.com - Event Par System™ User Manual Page 16
Channel Value
Function
1 RED
1 - 255 0% - 100%
2 GREEN
1 - 255 0% - 100%
3 BLUE
1 - 255 0% - 100%
4 COLOR MACROS
PLEASE SEE CHANNEL 1 MODE
5 STROBING/PROGRAM SPEED
0 - 15 OFF
16 - 255 SLOW - FAST
6 PROGRAMS
0 - 127 OFF
128 - 159 COLOR MIXING
160 - 191 3 COLOR CHANGE
192 - 223 7 COLOR CHANGE
224 - 255 SOUND ACTIVE
7 MASTER DIMMER
1 - 255 0% - 100%
Event Par System™ DMX Values & Traitss - 7 Channels
Event Par System™ Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter
-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
First unplug the power. The fuse holder is located next to the power
cord. Using a phillips screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Event Par System™ Fuse Replacement
Event Par System™ Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
2. Some DMX modes have a dimmer channel. Make sure the dim-
mer channel is not at 0%.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Check the sound sensitivity level. See Sound Active mode.
If problems are not resolved;
Contact Elation® for service.
1-866-245-6726
