Elation Event MH Скачать руководство пользователя страница 4

Страница: 4 / 60

Event MH™

©Elation Professional® 4 Event MH™

1. GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Event MH™ has been designed to perform

reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING:

Thank you for purchasing the Event MH™ by Elation Professional®. Every

Event MH™ has been thoroughly tested and has been shipped in perfect operating

condition. Carefully check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your unit for damage and be

sure all accessories necessary to operate the unit have arrived intact. In the event damage

has been found or parts are missing, please contact our customer support team for further

instructions. Please do not return this unit to your dealer without first contacting customer

support at the number listed below.

CUSTOMER SUPPORT:

Elation Professional® provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(323) 582-3322

Fax:

(323) 582-3108

E-mail:

[email protected]

Forum:

www.ElationLighting.com/forum

Warning

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs

Содержание Event MH





























































Результаты поиска

Содержание Event MH

Отзывы:

Похожие инструкции для Event MH

Бренды по названию

Популярные бренды

Elation Event MH, Руководство пользователя

Результаты поиска

Содержание Event MH

Отзывы:

Похожие инструкции для Event MH

Бренды по названию

Популярные бренды