w w w . e l a t i o n l i g h t i n g . c o m
15
DTW BLINDER 350 IP™ User Manual
S Y S T E M M E N U
The fixture comes with an easy to navigate system menu. The control panel (see
image below) located on the front the fixture provides access to the main system
menu and is where all necessary system adjustments are made to the fixture. During
normal operation, pressing
MODE
button once will access the fixture’s main menu.
Once in the main menu you can navigate through the different functions and
access the sub-menus with the
UP
and
DOWN
buttons. Once you reach a field that
requires adjusting, press the
ENTER
button to activate that field and use the
UP
and
DOWN
buttons to adjust the field. Pressing the
ENTER
button once more will confirm
your setting. You may exit the main menu at any time without making any
adjustments by pressing the
MODE/ESC
button.
LCD CONTROL PANEL LOCKOUT FEATURE
When the
AUTO LOCK
menu is set to
ON
(default setting); the LCD control panel
display will turn OFF and become LOCKED after non-use. To UNLOCK, press the
ENTER
button followed by pressing and holding the
MODE
button until the LCD
control panel display is UNLOCKED.
When the
AUTO LOCK
menu is set to
ON1
and is LOCKED, follow these steps to UNLOCK:
1.
When locked, the display will show:
LOCKED*****
2.
Press
UP
, then the display will change to:
LOCKED****
(one * disappears)
3.
Press
DOWN
, then the display will change to:
LOCKED***
(two * disappear)
4.
Press
UP
, then the display will change to:
LOCKED**
(three * disappear)
5.
Press
DOWN
, then the display will change to:
LOCKED*
(4 * disappear)
6.
Press
ENTER
, then the display will change to
LOCKED
and then become unlocked.
Содержание DTW BLINDER 350 IP
Страница 1: ...DTW BLINDER 350 IP user manual E L A TI ON DTW BLINDER 350 IP user manual...
Страница 24: ......
