11 DESIGN WASH 250 USER MANUAL V1.0 NR
Main functions:
- Main menu 0
1. Press
[MODE/ESC]
to enter the main menu
"MODE"
(display flashing)
2. Press
[ENTER]
and select
"ADDR"
,
“RUN”
or
"DISP"
by pressing
[UP]
or
[DOWN]
button.
3. Press
[ENTER]
for selecting the desired sub menu.
- DMX address setting, Slave setting
- DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
1. Select
“VALU“
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, adjust the DMX address by pressing
[UP]
or
[DOWN]
button.
3.
Press
[ENTER]
to confirm or pressing
[MODE/ESC]
to return to main menu.
- Slave setting
With this function, you can define the device as slave.
1. Select
“SLAV”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press [DOWN] to select
“OFF”
if you don’t.
4. Press
[ENTER]
to confirm or press
[MODE/ESC]
to return to main menu.
- Program Run, Master setting
With the function
"RUN"
, you can run the internal program. You can set the number of steps under Step. You can
edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO), i.e. with the
adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand Alone-mode and "MAST" that
the device is defined as master.
1. Select
"AUTO"
or
"SOUN"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
for selecting the desired extension menu.
3.
Select
"ALON"
or
"MAST"
by pressing
[UP]
or
[DOWN]
button.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
